Char-Broil THE BIG EASY 7101366 Manual De Usuario

Descargar
Página de 20
WARNING
If “growing” bubbles appear do not use or move the LP 
cylinder. Contact an LP gas supplier or your fire 
department!
Connecting Regulator to the LP Cylinder
1. LP cylinder must be properly secured onto 
. (Refer to 
assembly section.)
2. Turn all control knobs to the OFF position.
3. Turn LP cylinder OFF by turning hand-wheel clockwise to a 
full stop.
4. Remove the protective cap from LP cylinder valve. Always use 
cap and strap supplied with valve.
appliance
Safety Relief Valve
Nipple has to be centered
into the LP cylinder valve.
OPD Hand Wheel
Type 1 outlet with
thread on outside
ck
w
o
l
ise
C
 f
f
O
Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.
Strap and Cap
LP Cylinder Exchange
• Many retailers that sell 
 offer you the 
option of replacing your empty LP cylinder through an 
exchange service. Use only those reputable exchange 
companies that inspect, precision fill, test and certify their 
cylinders. 
 Exchange your cylinder only for an OPD safety 
feature-equipped cylinder as described in the "LP 
Cylinder" section of this manual.
• Always keep new and exchanged LP cylinders in upright 
position during use, transit or storage.
Leak test new and exchanged LP cylinders BEFORE 
connecting to grill.
LP Cylinder Leak Test
For your safety
• 
Leak test must be repeated each time LP cylinder is exchanged 
or refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• Appliance must be leak tested outdoors in a well-ventilated 
area, away from ignition sources such as gas fired or electrical 
appliances. During leak test, keep appliance away from open 
flames or sparks.
• Use a clean paintbrush and a 50/50 mild soap and water 
solution. 
• Do not use household cleaning agents. Damage to gas train 
components can result.
Oil-Less Turkey Fryer's
Brush soapy solution onto areas indicated by arrows 
in figure below.
5. Hold regulator and insert nipple into LP 
cylinder valve. Hand-tighten the 
coupling nut, holding regulator in a 
straight line with LP cylinder valve so 
as not to cross-thread the connection.
07101366  •  5