Carl Zeiss LSM 710 Manual De Usuario
2
05/2008
Introduction
This LSM 710 / LSM 710 NLO and ConfoCor 3 Quick Guide describes the basic operation of the
LSM 710 / LSM 710 NLO and ConfoCor 3 Laser Scanning microscopes with the ZEN 2008 software.
LSM 710 / LSM 710 NLO and ConfoCor 3 Laser Scanning microscopes with the ZEN 2008 software.
The purpose of this document is to guide the user to get started with the system as quick as possible in
order to obtain some first images from his samples.
order to obtain some first images from his samples.
This Quick Guide does NOT replace the detailed information available in the full user manual or in the
manual of the respective microscopes (Axio Imager, Axio Observer, Axio Examiner).
manual of the respective microscopes (Axio Imager, Axio Observer, Axio Examiner).
Also, this Quick Guide is written for a user who is familiar with the basics of Laser Scanning Microscopy.
For your safety!
Observe the following instructions:
Observe the following instructions:
−
The LSM 710 / LSM 710 NLO and ConfoCor 3 Laser Scanning Microscope, including
its original accessories and compatible accessories from other manufacturers, may
only be used for the purposes and microscopy techniques described in this manual
(intended use).
its original accessories and compatible accessories from other manufacturers, may
only be used for the purposes and microscopy techniques described in this manual
(intended use).
−
In the Operating Manual, read the chapter Safety Instructions carefully before
starting operation.
starting operation.
−
Follow the safety instructions described in the operating manual of the microscope
and X-Cite 120 lamp / HBO 100 mercury lamp.
and X-Cite 120 lamp / HBO 100 mercury lamp.