Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario
Networking
Address Management
Cisco ISA500 Series Integrated Security Appliances Administration Guide
176
4
-
Network: Network address object like the Range object comprises
multiple hosts, but rather than being bound by specified upper and lower
range delimiters, the boundaries are defined by a valid netmask. Network
address objects must be defined by the network’s address and a
corresponding netmask. As a general rule, the first address in a network
(the network address) and the last address in a network (the broadcast
address) are unusable. If you choose Network, enter the subnet IP
address in the IP Address field and the broadcast address in the
Netmask field.
multiple hosts, but rather than being bound by specified upper and lower
range delimiters, the boundaries are defined by a valid netmask. Network
address objects must be defined by the network’s address and a
corresponding netmask. As a general rule, the first address in a network
(the network address) and the last address in a network (the broadcast
address) are unusable. If you choose Network, enter the subnet IP
address in the IP Address field and the broadcast address in the
Netmask field.
-
MAC: Identifies a host by its hardware address or MAC (Media Access
Control) address. MAC addresses are uniquely assigned to wired or
wireless networking devices by their hardware manufacturers. MAC
addresses are 48-bit values that are expressed in 6 byte hex-notation. If
you choose MAC, enter the MAC address
Control) address. MAC addresses are uniquely assigned to wired or
wireless networking devices by their hardware manufacturers. MAC
addresses are 48-bit values that are expressed in 6 byte hex-notation. If
you choose MAC, enter the MAC address
in the MAC field.
STEP 4
Click OK to save your settings.
STEP 5
Click Save to apply your settings.
Configuring Address Groups
An address group object combines with multiple address objects. The security
appliance supports up to 64 address group objects. An address group can include
up to 100 address members.
appliance supports up to 64 address group objects. An address group can include
up to 100 address members.
STEP 1
Click Networking > Address Management.
STEP 2
In the Address Groups area, click Add Group to add a new address group object.
Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click
the Delete (x) icon. To delete multiple entries, check them and click Delete.
the Delete (x) icon. To delete multiple entries, check them and click Delete.
The Address Group - Add/Edit window opens.
STEP 3
Enter the name for the address group object in the Group Name field.
STEP 4
To add the address objects to the group, select the address objects from the left
list and click the right arrow.
list and click the right arrow.
STEP 5
To remove the address objects from the group, select the address objects from
the right list and click the left arrow.
the right list and click the left arrow.
STEP 6
Click OK to save your settings.