Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Configuring a Captive Portal

Cisco ISA500 Series Integrated Security Appliances Administration Guide

181

 

For a Captive Portal on the wireless network, you must enable the wireless radio 
and at least one SSID before you can enable a Captive Portal. To configure these 
settings, use the Wireless > Basic Settings page. .

•

Enable the wireless radio.

•

Enable the SSID(s) that you want to use for the portal. 

•

If you created a special VLAN for use with your Captive Portal, assign it to 
the SSID(s) that you want to use for the portal.

If you want to require user authentication for your portal, the security appliance 
can authenticate the users by using the local database and an external AAA 
server (such as RADIUS, AD, and LDAP). The authentication method is derived 
from the user authentication settings that you specified in the Users > User 
Authentication page. See 

Configuring User Authentication Settings, page 393

.

For the local database option, you need to set up a User Group with the Captive 
Portal service enabled, and add the users’ names and passwords. .

You configure this feature separately for the wireless network (Wireless > Captive 
Portal ) and for the wired network (Networking > Captive Portal).

Enable Captive Portal: Click On to enable the Captive Portal feature. 

Apply On: Choose the SSID, VLAN, or DMZ interface on which to apply the 
Captive Portal settings. 

Web Authentication Type: Choose one of the following methods for web 
authentication. The security appliance can authenticate the users by using the 
local database and external AAA server (such as RADIUS, AD, and LDAP). The 
authentication method is derived from the user authentication settings that you 
specified in the Users > User Authentication page.

•

Internal: Uses the default HotSpot Login page and requires a login.