Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Configuring a Captive Portal

Cisco ISA500 Series Integrated Security Appliances Administration Guide

223

 

•

You may want to associate a VLAN, such as the GUEST VLAN, with a 
security zone so that you can configure appropriate security policies. For 
example, you can apply URL filtering policies to the zone to prevent access 
to certain types of websites.

•

A Captive Portal must be associated either with a single SSID or with a 
VLAN. If you want to enable a portal for users of multiple SSIDs, you will 
need to assign them all to the same VLAN. You can use a pre-configured 
VLAN or can create a VLAN for this purpose.

For a Captive Portal on the wireless network, you must enable the wireless radio 
and at least one SSID before you can enable a Captive Portal. To configure these 
settings, use the Wireless > Basic Settings page. .

•

Enable the wireless radio.

•

Enable the SSID(s) that you want to use for the portal. 

•

If you created a special VLAN for use with your Captive Portal, assign it to 
the SSID(s) that you want to use for the portal.

If you want to require user authentication for your portal, the security appliance 
can authenticate the users by using the local database and an external AAA 
server (such as RADIUS, AD, and LDAP). The authentication method is derived 
from the user authentication settings that you specified in the Users > User 
Authentication page. See 

Configuring User Authentication Settings, page 393

.

For the local database option, you need to set up a User Group with the Captive 
Portal service enabled, and add the users’ names and passwords. .

You configure this feature separately for the wireless network (Wireless > Captive 
Portal ) and for the wired network (Networking > Captive Portal).