Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Managing Security License

Cisco ISA500 Series Integrated Security Appliances Administration Guide

439

 

Remove all cables from the WAN and LAN ports.

Connect your PC to the LAN port.

Configure your PC with a static IP address of 192.168.75.100 and a subnet mask of 
255.255.255.0. 

On your PC, start your TFTP client, such as tftpd32. Specify the host IP address as 
192.168.75.1 and transfer the ISA500 firmware file from your PC to the security 
appliance.

The security appliance will upgrade the firmware after you upload the image. This 
process should take several minutes including the reboot process. 

IMPORTANT: During firmware upgrade, do not turn off the device, shut down the 
PC, interrupt the process, or remove the cable in any way until the operation is 
complete. 

When the POWER/SYS light on the front panel is solid green, the system is 
operating normally. 

The security services are licensable. A valid security license is required to activate 
security services and to support SSLVPN with mobile devices such as smart 
phones and tablets. The Product Authorization Key (PAK) and a valid Cisco.com 
account are required to install the security license. You can find the license code 
from the paper license that is shipped with the unit. 

Use the License Management page to manage the security license. Refer to the 
following topics: 

•

•