Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario
Configuration Wizards
Using the Site-to-Site VPN Wizard to Configure Site-to-Site VPN
Cisco ISA500 Series Integrated Security Appliances Administration Guide
67
2
Starting the Site-to-Site VPN Wizard
STEP 1
Click Configuration Wizards > Site-to-Site VPN Wizard.
STEP 2
Click Next.
Configuring VPN Peer Settings
STEP 3
Use the VPN Peer Settings page to configure an IPsec VPN policy for establishing
the VPN connection with a remote router.
the VPN connection with a remote router.
•
Profile Name: Enter the name for the IPsec VPN policy.
•
WAN Interface: Choose the WAN port that traffic passes through over the
VPN tunnel.
VPN tunnel.
•
Remote Type: Specify the type of the remote peer:
-
Static IP: Choose this option if the remote peer uses a static IP address.
Enter the IP address of the remote device in the Remote Address field.
Enter the IP address of the remote device in the Remote Address field.
-
Dynamic IP: Choose this option if the remote peer uses a dynamic IP
address.
address.
-
FQDN (Fully Qualified Domain Name): Choose this option if you want to
use the domain name of the remote network such as vpn.company.com.
Enter the domain name of the remote device in the Remote Address field.
use the domain name of the remote network such as vpn.company.com.
Enter the domain name of the remote device in the Remote Address field.
•
Authentication Method: Specify the authentication method.
-
Pre-Shared Key: Uses a simple, password-based key to authenticate. If
you choose this option, enter the desired value that the peer device must
provide to establish a connection in the Key field. The pre-shared key
must be entered exactly the same here and on the remote peer.
you choose this option, enter the desired value that the peer device must
provide to establish a connection in the Key field. The pre-shared key
must be entered exactly the same here and on the remote peer.
-
Certificate: Uses the digital certificate from a third party Certificate
Authority (CA) to authenticate. If you choose this option, select a CA
certificate as the local certificate from the Local Certificate drop-down
list and select a CA certificate as the remote certificate from the Remote
Certificate drop-down list. The selected remote certificate on the local
gateway must be set as the local certificate on the remote peer.
Authority (CA) to authenticate. If you choose this option, select a CA
certificate as the local certificate from the Local Certificate drop-down
list and select a CA certificate as the remote certificate from the Remote
Certificate drop-down list. The selected remote certificate on the local
gateway must be set as the local certificate on the remote peer.
NOTE: You must have valid CA certificates imported on your security
appliance before you use the digital certificates to authenticate. Go to the
Device Management > Certificate Management page to import the CA
certificates. See
appliance before you use the digital certificates to authenticate. Go to the
Device Management > Certificate Management page to import the CA
certificates. See