Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Using the Wireless Wizard (for ISA550W and ISA570W only)

Cisco ISA500 Series Integrated Security Appliances Administration Guide

77

 

-

802.11b/g/n mixed: Choose this mode to allow 802.11b, 802.11g, and 
802.11n clients operating in the 2.4 GHz frequency to connect to the 
access point.

-

802.11n only: Choose this mode if all devices in the wireless network 
can support 802.11n. Only 802.11n clients operating in the 2.4 GHz 
frequency can connect to the access point. 

•

Wireless Channel: Choose a channel from a list of channels or choose Auto 
to let the system determine the optimal channel to use based on the 
environmental noise levels for the available channels. 

After you are finished, click Next. 

Use the Choose SSIDs page to enable and configure the SSIDs that you want to 
use. 

•

Enable: Check this box to enable the SSID. 

•

Mode: Choose the wireless connectivity type for each enabled SSID. 

-

Intranet WLAN Access: Allows the wireless users to access the 
corporate network via the wireless network. By default, the WLAN is 
mapped to the DEFAULT VLAN. 

-

Guest WLAN Access: Only allows the wireless users who connect to the 
guest SSID to access the corporate network via the wireless network. By 
default, the WLAN is mapped to the GUEST VLAN. 

-

Captive Portal Access: Only allows the users who have authenticated 
successfully to access the corporate network via the wireless network. 
The wireless users will be directed to a specific HotSpot Login page to 
authenticate, and then will be directed to a specified web portal after 
login before they can access the Internet. 

NOTE: Only one SSID can be set for Captive Portal access at a time. 

After you are finished, click Next.