Casio Network Card YW-2L Manual De Usuario
41
Note
The initial default setting for each item is indicated by an asterisk (*).
Setting Name
Description
Profile Name
This is a name assigned to identify each individual manual connection.
Input up to 10 characters.
Input up to 10 characters.
SSID
Wireless network ID name. This is normally referred to as the SSID, ESS-ID,
or network name. Input up to 32 single-byte alphanumeric characters.
or network name. Input up to 32 single-byte alphanumeric characters.
Access Mode
Specifies either wireless LAN connection through an access point or direct
connection between the Data Projector and computer without going through
an access point.
connection between the Data Projector and computer without going through
an access point.
Access Point:
Specifies wireless LAN connection through an access point.
Ad Hoc*:
Specifies direct wireless LAN connection between the Data Projector and
computer.
computer.
Security
Setup
Setup
Specifies whether or not communication over the wireless LAN connection is
encrypted. A setting to select the encryption type is also provided. The Data
Projector supports three types of encryption: WEP, WPA-PSK, and WPA2-
PSK.
encrypted. A setting to select the encryption type is also provided. The Data
Projector supports three types of encryption: WEP, WPA-PSK, and WPA2-
PSK.
Off*:
Encryption turned off.
WEP:
Turns on WEP encryption. When this option is selected, you also must
specify a WEP key format and a WEP key.
z The letters “WEP” stand for “Wired Equivalent Privacy”. It is a security
specify a WEP key format and a WEP key.
z The letters “WEP” stand for “Wired Equivalent Privacy”. It is a security
protocol that uses a character string to encrypt data and protect against
unauthorized access to wireless communications.
unauthorized access to wireless communications.
WPA-PSK:
Turns on WPA-PSK encryption. When this option is selected, you also must
specify a WPA/WPA2 encoding and a WPA/WPA2 pass phrase.
z The letters “WPA” stand for “Wi-Fi Protected Access”. Like WEP, it is a
specify a WPA/WPA2 encoding and a WPA/WPA2 pass phrase.
z The letters “WPA” stand for “Wi-Fi Protected Access”. Like WEP, it is a
security protocol that encrypts communication data. WPA uses an
automatically generated encryption key that is changed at preset
intervals, which provides stronger security than WEP.
automatically generated encryption key that is changed at preset
intervals, which provides stronger security than WEP.
WPA2-PSK:
Turns on WPA2-PSK encryption. When this option is selected, you also
must specify a WPA/WPA2 encoding and a WPA/WPA2 pass phrase.
z WPA2 is a new standard of WPA.
must specify a WPA/WPA2 encoding and a WPA/WPA2 pass phrase.
z WPA2 is a new standard of WPA.
Note
z You cannot select WPA-PSK or WPA2-PSK when “Ad Hoc” is
selected for the “Access Mode” setting.
z WPA-PSK and WPA2-PSK encryption cannot be selected on a
computer running Windows XP or 2000. If you want to use either
of these encryption systems, connect to an existing network that is
using the system you want to use. See ““Connect to an existing
network” check box” (page 39) for information about connecting to
an existing network.
of these encryption systems, connect to an existing network that is
using the system you want to use. See ““Connect to an existing
network” check box” (page 39) for information about connecting to
an existing network.
z Depending on your computer system setup, connecting with WPA-
PSK or WPA2-PSK encryption may not be possible. If you
experience problems, contact your network administrator.
experience problems, contact your network administrator.