CAVS 105G Manual De Usuario

Descargar
Página de 27
Power plug is not inserted securely. Plug in securely.
Power does not come on.
Region code of the inserted disc does not match the 
player. Check the region code of the disc printed on the 
disc jacket. To change the region code of the player, 
please visit www.cavsusa.com. 
"REGION CODE ERROR!" is shown on the TV 
screen.
Microcomputer malfunction due to lightning or static 
electricity. Turn off the power and unplug the power 
cord, then connect the power cord again.
Moisture condensation caused by a sudden change of 
temperature or humidity. Turn off the power, then turn it 
on a few hours later.
The disc does not allows the operation, or an 
unplayable disc is inserted. Check and replace the disc.
Operation is not possible.
The player is connected to a VCR directly and the 
copyguard function is activated. Connect the player so 
that the picture signal flows directly to the TV.
With some discs, the picture may be blurred when PIC 
MODE is set to FILM or AUTO. Set PIC MODE to 
VIDEO or SUPER SMART.
Picture is noisy.
The Progressive scanning mode is activated. Change 
the scanning mode to the Interlaced scanning mode by 
selecting VIDEO OUTPUT in PREFERENCE SETUP 
as SVIDEO or YCBCR.
Picture is distorted when using COMPONENT 
VIDEO OUT or S-VIDEO output jack(s).
This player can play back the MP3 sound for the audio 
part of the AVI files. Select the proper audio CODEC 
when making AVI files.
AVI files are played back without sound.
The format of the file is not asf.
AVI files cannot be played back.
Power
Operation
Picture
AVI/MP3 disc is recorded with the "packet writing (UDF 
format)." It cannot be played.
Check the files you want to play back.
No sound and / or no picture comes out.
This player plays the files in the alphabetic order. So, 
the playback order can vary.
Files (tracks) are not played in the recorded order.
AVI/MP3/JPEG
21
Connect the downmix L/R outputs of the player to your 
sound system.  Digital audio connection does not carry 
microphone signals.
No microphone signal can be found in the audio.
When selecting a song after a rest, insert a song 
number and wait for the display of title before pressing 
ENTER or PLAY.
No graphics come out when playing Super CD+G.
Karaoke
Press MIC ON to turn on the KARAOKE MODE.
Key control does not work.
Specifications and appearance are subject to change without 
prior notice. 
NTSC/PAL, 480i (Interlaced scan)
/ 480p (Progressive scan) 
Optical discs 
General
CD (sampling frequency 44.1 kHz):
- 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
- 2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby 
Digital bitstream signals)
DVD (sampling frequency 96 kHz):
- 2 Hz to 44 kHz
16 bit: More than 98 dB
20 bit/24 bit: More than 100 dB
Unmeasurable (less than    0.002%)
      Less than 0.007%
Frequency response
Dynamic range
Wow and flutter
Total harmonic distortion 
Audio characteristics
Video format
Horizontal resolution 500 lines or more 
Y Output: 1.0 Vp-p (75    )
P
B
/P
R
 Output: 0.7 Vp-p (75    )
1.0 Vp-p (75    )
Y Output: 1.0 Vp-p (75    )
C Output: 286 mVp-p (75    )
COMPONENT
(pin jacks)
VIDEO OUT
(pin jack)
S-VIDEO OUT
(S jack) 
Video outputs
2.0 Vrms (10 k    )
0.5 Vp-p (75     termination)
-21 dBm to -15 dBm (peak)
ANALOG OUT
(pin jack)
DIGITAL OUT
(COAXIAL)
DIGITAL OUT
(OPTICAL) 
Audio outputs
Additional information
Troubleshooting
Troubleshooting
Specifications
Specifications
AC 110 - 240V 50/60Hz
10W (POWER ON),
1.1W (STANDBY mode)
2.1kg (4.7 lbs)
Power requirements
Power consumption
Mass 
Other
Dimensions
(W   H   D)
435mm   47mm   259mm
(17- /   inch   1- /  inch   10- /  inch)
DVD, Video CD, Super CD+G, INX, 
INX2, CD+G, Audio CD, HDCD
AVI, MP3, JPEG
DVD   R, DVD   R DL, DVD-RW, 
CD-R/RW