Carrier Access Network Device Axxius 800 Manual De Usuario

Axxius 800 - Release 2.2

5-13

CLI Commands

add

add (router) uploaduser

Use the add (router) uploaduser command to specify a host that is allowed to upload either
the configuration or software files to the specified Router card.

Syntax:

add {rtr_card-addr} uploaduser {code|config|both}

{all|ip-addr} {"profile-name"}

Example:

add 3 uploaduser code all "LosAngeles"

The example will allow any user to upload the code file from the TSR interface
named "LosAngeles". The TSR is located in slot 3.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{both|code|config}

{all|ip-addr}

{"profile-name"}

The name of the remote WAN or LAN profile that can be used for the upload. This name
must be enclosed in quotes.

both

Will allow user to upload both the code file and the configuration file
from the Router

code

Will allow user to upload the code file from the Router

config

Will allow user to upload the configuration file from the Router

all

Will allow upload from anywhere

ip-addr

The IP address to allow upload boot from. In the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255