Carrier Access Network Device Axxius 800 Manual De Usuario

Axxius 800 - Release 2.2

5-87

CLI Commands

set

set (fxo)

Use the set (fxo) command to setup one or all of the voice channels of an FXO card. The
command specifies the list of voice channels within that card, and the setting to apply.

Syntax:

set {fxo-addr} {setting}

Example:

set 2:1 signal ls

Set the FXO on slot 2, port 1 to signaling type loop start.

{fxo-addr}

List of voice channels to apply setting to, in the form {slot:port}.

{setting}

slot

Slot number 1-8, location of the FXO card

port

Port number or range

rxgain

The receive level range is -9 to +7 (db). Available values are -9, -7, -6, -5,
-4, -3, -2, 0, 2, 3, 4, 5, 6, and 7

signal

Set the DS0 signaling type

dpt

Set the DS0 to Dial Pulse Terminate

Set the DS0 to Ground Start signaling

Set the DS0 to Loop Start signaling

lscpd

Set the DS0 to Loop Start Calling Party Disconnect

txgain

The transmit level range is -9 to +7 (db). Available values are -9, -7, -6,
-5, -4, -3, -2, 0, 2, 3, 4, 5, 6, and 7