Carrier Access Network Device Axxius 800 Manual De Usuario

Axxius 800 - Release 2.2

5-91

CLI Commands

set

set key

Use the set key command to enable a specific keyed feature. To acquire a feature key code,
contact Carrier Access Customer Service. Currently, keyed features (if available) can be
enabled on a Controller or a Router.

Syntax:

set [rtr_card-addr] key {"key-code"}

Example:

set 4 key "q0B8yma2IsSL+1BarY0u"

[rtr_card-addr]

The slot number (1-8) that contains the Router card. This optional parameter is used for
router specific keyed features. If a slot is not entered, key is directed to the Controller.

{"key-code"}

The key code is entered to enable the specific feature.

set login auth

Use the set login auth command to set the authentication method for controller logins, with
local database or external RADIUS server. When set to RADIUS the controller will try the
configured RADIUS servers first. If none of the configured RADIUS server reply to the request,
the controller will use its local database of users to authenticate the login. An attempt set login
authentication to RADIUS will fail if there is not at least 1 RADIUS server configured.

Syntax:

set login auth {local|radius}

Example:

set login auth radius

The example will set the login authentication process to RADIUS.

{local|radius}

local

Authenticate user logins via the controller database. Default.

radius

Authenticate user logins via the external RADIUS servers.