Carrier Access Network Device Axxius 800 Manual De Usuario
Axxius 800 - Release 2.2
5-107
CLI Commands
set
set (router) dhcp server startaddr
Use the set (router) dhcp server startaddr command to enable the DHCP server on the
specified Router card.
specified Router card.
Syntax:
set {rtr_card-addr} dhcp server startaddr
{ip-addr} {count}
Example:
set 4 dhcp server startaddr 134.200.3.1 254
The example will set the TSR in slot 4 to enable the DHCP server with 254
address pool starting at 134.200.3.1.
address pool starting at 134.200.3.1.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{ip-addr}
The starting address of the client address pool, in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
is between 0-255.
{count}
The number of IP addresses in the client address pool (1-254).