Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Carrier Access
  4. Network Device Axxius 800
  5. Manual De Usuario

Carrier Access Network Device Axxius 800 Manual De Usuario

Descargar
Página de 568
Axxius 800 - Release 2.2
5-247
CLI Commands
status
status (router) ip address table
Use the status (router) ip address table command to display the current IP address table 
for the specified TSR card.
Syntax:
status {tsr_card-addr} ip address table 
["profile-name"] 
Example:
status 5 ip address table
>   status 5 ip address table
          ROUTER BLADE IP ADDRESSES REPORT Slot-5
Axxius50 has learned 2 IP Addresses from 1 Port.
 Display: <IP Address >   Learned From: <All Ports   >
      Port Name               IP Address       MAC Address
  1.  Local LAN     Static    120.0.0.10
  2.  Local LAN     Direct    192.168.3.196    00E09701E574  
Example:
status 5 ip address table "Axxius50"     
> status 5 ip address table "Axxius50"
          ROUTER BLADE IP ADDRESSES REPORT Slot-5
Axxius50 has learned 2 IP Addresses
 Display: <IP Address >   Learned From: <Local LAN >
                  IP Address       MAC Address
  1.    Static    120.0.0.10
  2.    Direct    192.168.3.196    00E09701E574     
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The profile name for the TSR interface that is used to reach this destination. Name must be 
enclosed in quotes, with a maximum length of 11 characters.