Carrier Access AB II Manual De Usuario

System Setup Screens

Chapter 2

System Setup

The System Setup screens guide you through the naming of the system components, problem 
reporting, remote management, system clock, and SNMP setup. The first thing you must set up is 
Remote Management so you can connect to the Access Bank II, and the Send and Read operations 
between the Remote Monitor and the Access Bank II will work.

After making changes to the configuration on any screen, you must send the 

changes to the Access Bank II before the changes will take effect. To do this, click 
on Send Current Screen to Unit in the Connections pull-down menu, or click on the 
Send icon at the top of the screen. If you make changes to many screens, you can use 
the Send All Configurable Screens to Unit item on the Connections pull-down menu.

The Remote Monitor provides a method for flagging screens you change as you set up the Access 
Bank II. It is a user-initiated feature. That is, you must actively flag and unflag the screens yourself. 
This feature makes it easier for you to remember to send all the changed screens to the Access Bank 
II.

To flag a screen you have changed, simply right-click on the screen tab when that screen is active, 
and a flag symbol appears on the tab. To unflag a screen, right-click it again, or click the Clear all 
Send Flags icon. 

Alternately, you can use the Clear All Send Flags and Send All Flagged Screens options on the 
Connections menu.

The screen flags are not automatically cleared when you send screens to the Access Bank II.