Carrier Access KTA Manual De Usuario
After network connection, please pick up handset, press key “#*047#” to hear IP address of the
adaptor box. In the address field of browser, type the IP address and press ENTER to display the
Settings page. A log-in page will be shown. Enter log-in password to set parameters. The default
password is 1234.
If adaptor box cannot get IP, enter “##3427# to cancel DHCP mode. After reset and beep sound
heard, please pick up the handset, enter “#73847#xxx*xxx*xxx*xxx#” to set IP address of adaptor
box. Get the IP address and use browser to set up.
adaptor box. In the address field of browser, type the IP address and press ENTER to display the
Settings page. A log-in page will be shown. Enter log-in password to set parameters. The default
password is 1234.
If adaptor box cannot get IP, enter “##3427# to cancel DHCP mode. After reset and beep sound
heard, please pick up the handset, enter “#73847#xxx*xxx*xxx*xxx#” to set IP address of adaptor
box. Get the IP address and use browser to set up.
¾ Network Settings
Depending on the requirement of your ISP or Network you can configure the KTA with a Static IP,
DHCP, or PPPoE:
DHCP, or PPPoE:
Static IP: If your ISP / Network requires the use of a Static IP then you will be required to
complete all of the parameters listed below:
complete all of the parameters listed below:
6
Fill in IP
Fill in subnet mask
Fill in default
gateway ip
gateway ip