Canon Wireless File Transmitter WFT-E2 II A Manual

17

Following the Connection Wizard

Basic Network Settings

 

To configure settings for the wireless LAN device manually, select [Enter connection] and 
press <0>. Complete the settings for the items displayed, one after another.

 

To search for wireless LAN devices again, select [Search again] and press <0>.

Next, enter the encryption key of the wireless LAN device. For details on the encryption key, 
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and 
encryption of the wireless LAN device.

 

The [Key index] screen is displayed only if WEP 
encryption is used by the wireless LAN device.

 

Turn the <5> dial to select the key index number 
specified as the access point, and then press 
<0>.

 

Select [OK] and press <0> to go to the next 
screen.

 

Turn the <5> dial to select the key format, and 
then press <0>.

 

Select [OK] and press <0> to go to the next 
screen.

 

Enter the encryption key.

 

To switch between input areas, press the <H> 
button.

 

To move the cursor, turn the <5> dial.

 

In the bottom input area, turn the <5> dial and 
press <0> to enter the encryption key.

 

If you make a mistake, press the <L> button to 
erase it.

 

Press the <7> button to go to the next screen.

 

To return to the previous screen, press the 
<6> button. The entry is erased.

COP

Y