Canon Microfilm Scanner 300 Manual De Propietario

36

■ Printing (DMP mode) ■

The following describes the printing procedure in the DMP mode.

1. Make necessary settings on the main unit.

2. Select the paper size that you want to print on.

■ Using the Fileprint 250

If using the Fileprint 250, select paper size set on the Paper Tray.
(1) Press the Cassette Select key or the Clear/Stop key for about 3

seconds to enter the paper size setting mode. The current pa-
per size then appears on the Print/Error display.

A4

Letter

B5

Legal

(2) When you press the plus (+) key of the Print Number Setting

key, the display changes as A4

➞11➞b5➞14 in due order,

and if you press the minus (–)  key, 14

➞b5➞11➞A4 in due

order.

(3) Press the Clear/Stop key to define the paper size that you want

to use.

■ Using the Fileprint 450

If using the Fileprint 450, select a paper cassette or the pickup
tray to use.

The paper size to be set on the paper tray will be se-
lected by a service technician during the installation of
Fileprint 450.

(1) Press the Clear/Stop key for about 5 seconds to enter the paper

cassette select mode. The current paper cassette then appears
on the Print/Error display.

Multipurpose tray selected

Upper cassette selected

Lower cassette selected

(2) When you press the plus (+) key on the Print Number Setting

key, the display changes as C0

➞C1➞C2➞C0 in due order,

and if you press the minus (–) key, C0

➞C2➞C1➞C0 in due

order.

(3) Press the Clear/Stop key to define the paper size that you want

to use. The Print/Error display then returns to “01.”