Canon LV-X6 Manual De Instrucciónes

This section describes how to turn on the projector and to project a picture onto the screen.

� Turning on the Projector

NOTE:
• The projector has two power switches: a main power switch and a POWER button.
• When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off (

䡬)

position. Failure to do so may cause damage to the projector.

•

The POWER indicator will light orange.
See the Power Indicator section on page 

 for more

details.

The POWER indicator will turn to green and the
projector will become ready to use.

After you turn on your projector, ensure that the
computer or video source is turned on and that your
lens cap is removed.

NOTE: If you turn on the projector immediately after the lamp is
turned off or when the temperature is high, the fans runs without
displaying an image for some time and then the projector will
display the image.

Standby

Blinking

Power On

Steady or-
ange light

Blinking

green light

Steady

green light

 for more details.

The projector cannot be turned off for 60 seconds after
the lamp is turned on and while the POWER indicator is
blinking green. Doing so could cause premature lamp
failure.