Canon Computer Accessories ver 3.5 Manual De Usuario

55

You can adjust images with the tool palette by switching between the 
[RAW], [RGB] and [NR/Lens/ALO] tab sheets according to your editing 
requirements.
The [RGB] tool palette functions are the same as ordinary image editing 
software, such as tone curve adjustment that is explained here, with 
which you can adjust RAW images.
However, because the adjustment width of the adjustment functions in 
the [RGB] tool palette is wider than the [RAW] tool palette, the image 
color may be saturated, or the image quality may deteriorate if you 
adjust too much. Therefore we recommend for functions other than tone 
curve adjustment and automatic adjustment 

, that you adjust 

images using the same functions available in the [RAW] tool palette.
Refer to Chapter 5 for explanations on functions of the [RGB] tool 
palette other than tone curve adjustment.

We recommend that as a general principle you edit RAW images using 
the [RAW] tool palette. However, where the adjustment width with the 
[RAW] tool palette is not wide enough and you wish to use the special 
functions in the [RGB] tool palette, we recommend that you adjust your 
images at the necessary lowest limit with the [RGB] tool palette after 
having completed basic adjustment with the [RAW] tool palette.
Use the adjustment function of the [NR/Lens/ALO] tool palette 

when applying the Auto Lighting Optimizer 

, reducing noise 

or correcting aberration 

 after you have made any required 

adjustments with the [RAW] and [RGB] tool palettes.

COP

Y