Atmel SpaceWire Router SpW-10X Manual De Usuario

Ref.:   UoD_SpW-10X_ 

 

Issue:  3.4 

  

 

Date:  11

 

 

152

 

5.7.4 

 

VCO bias resistor value corrected (Section 5.7.4). 

8.1.5 

 

Tri-state mode changed to deactivate mode. Calculation of 
deactivated power consumption added. 

9.4.3 

Table 9-6 

Tri-state mode changed to deactivated mode. 

9.5.8 

 

Description for ‘time-code flag mode bit’ added. 

11.1 

Table 11-1 

Power information updated. 

11.3 

 

Section added on reliability information 

13.1 

 

Reference to further details on anomaly 1 in section 13.3 
added. 
Anomaly 2 (tri-state mode) removed. The text throughout the 
document related to tri-state mode has been corrected to 
deactivated mode. A warning that the deactivated mode is not 
true tri-state has been added. 

13.3 

 

Section added to give more details on reset anomaly. 

 

15.4  ISSUE 3.0 TO ISSUE 3.1 

5.6 

 

Second warning clarified. 

7.6.10 

 

Note added explaining that command packet fill bytes is a 
feature of the SpW-10X and not of RMAP. 

8.1.6 
13.2 

 

Warning on setting data rate to less than 2 Mbits/s deleted. 
The SpW-10X device will not allow a TXDIV and TXRATE to be 
set to give a transmit data rate below 2 Mbits/s. 

8.3.2.4 

 

Note added to further explain blocking of low priority packets by 
high priority ones. 

8.3.5.3 

 

Corrections made.  When output port not running or in a group 
and not running, the router will waits for the timeout period for 
the link to start. If it does not start in that time then the packet 
will be spilt. 

11.1 

 

References to [AD3] corrected. 

12.1 

 

Example schematic changed to a format that is readable. 

 

15.5  ISSUE 2.5 TO ISSUE 3.0 

Entire 
document 

 

Major edit providing clarifications and additional application