Atmel ATA5577 Prospecto
Access Control ISO Cards, Key Fobs, and Coins
Asset Management
Animal Identifi cation
(Supporting ISO 11784/11785 – FDX-B)
– Livestock Tracking
– Pigeon Racing Tags
Waste Management
ISO 11784/11785 (Non-Animal Mode)
Laundry
Manufacturing and Logistics
– Material Handling
– Recycling
– Cylinder Tracking
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALES LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY
DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE
USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifi cations and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifi cally provided otherwise, Atmel
products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALES LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY
DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE
USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifi cations and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifi cally provided otherwise, Atmel
products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
The EEPROM is made up of two pages. Page 0
consists of 8 blocks, including confi guration reg-
ister and 32-bit password. Page 1 includes three
blocks of 32 bits each and contains the 64-bit
unique ID and the analog front end register. Each
block can be protected against reprogramming via
a lock bit.
consists of 8 blocks, including confi guration reg-
ister and 32-bit password. Page 1 includes three
blocks of 32 bits each and contains the 64-bit
unique ID and the analog front end register. Each
block can be protected against reprogramming via
a lock bit.
Applications
Ordering Information
Memory Mapping
Password Mode
Support Tools
The memory of the ATA5577 can be protected
against unauthorized access. The password mode
provides write protection and – in combination with
the AOR feature – read protection.
against unauthorized access. The password mode
provides write protection and – in combination with
the AOR feature – read protection.
© 2008 Atmel Corporation.
All rights reserved.
All rights reserved.
Atmel
®
, logo and combinations there-
of, IDIC
®
, and others are registered
trademarks or trademarks of Atmel
Corporation or its subsidiaries. Other
terms and product names may be
trademarks of others.
Corporation or its subsidiaries. Other
terms and product names may be
trademarks of others.
Rev.: 4612B-RFID-03/08/00M
Part Number
ATA5577M#
On-Chip
Cacity Value pF
ccc
Package
-xxx
Description
ATA5577M1
(Standard Pads)
(Standard Pads)
000
1)
075
1)
250
330
330
DDB
6" Sawn Wafer on Foil with Ring, Thickness 150 µm (Approx. 6 mil)
DBB
6" Sawn Wafer on Foil with Ring and NiAu Bumps 25 µm, Thickness 150 µm
(Approx. 6 mil)
(Approx. 6 mil)
DDW
1)
6" Wafer, Thickness 280 µm (approx. 11 mil)
DDT
1)
Die in Waffl e Pack, Thickness 280 µm (Approx. 11 mil)
PAE
1)
NOA3 Micromodule (Lead-free)
ATA5577M2
(Mega Pads)
(Mega Pads)
000
1)
075
1)
250
330
330
DBB
6" Sawn Wafer on Foil with Ring and Au Bumps 25 µm, Thickness 150 µm
(approx. 6 mil)
(approx. 6 mil)
DDT
1)
Die in Waffl e Pack, Thickness 150 µm (Approx. 6 mil)
1)
On Request
Headquarters
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (1) 408 441-0311
Fax: (1) 408 487-2600
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (1) 408 441-0311
Fax: (1) 408 487-2600
International
Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road, Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Room 1219
Chinachem Golden Plaza
77 Mody Road, Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 St Quentin-en-
Yvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 St Quentin-en-
Yvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Contact
Product Line
rfid@atmel.com
rfid@atmel.com
Literature Requests
www.atmel.com/literature
www.atmel.com/literature
Web Site
www.atmel.com
www.atmel.com
0
1..............................................................32
Page 1
L
Analog Front End
Option Setup
Block 3
1
Traceabilty Data
Block 2
1
Traceabilty Data
Block 1
L
Page 0 Confi guration Data
Block 0
Page 0
L
User Data or Password
Block 7
L
User Data
Block 6
L
User Data
Block 5
L
User Data
Block 4
L
User Data
Block 3
L
User Data
Block 2
L
User Data
Block 1
L
Confi guration Data
Block 0
Application Kits – ATAK2270, ATA2270-EK1
Datasheet
Application Notes
Qual Packs