AstroStart 60Cx Manual De Usuario

You can connect your GPSMAP 60Cx to your 

computer using either a serial port or USB connector 

cable. 

1.  Lift the USB protective cover from the back 

of the GPSMAP 60Cx, and insert the smaller 

connector on the USB cable into the matching 

port.

2.  Connect the remaining cable end to your 

computer's USB port.

1.  Lift the Serial Port protective cover from the 

back of the GPSMAP 60Cx, and insert the 

round indexed connector on the cable into the 

matching port.

2.  Connect the remaining cable end to your PC 

Serial port or other appropriate device.

3.  Set your GPSMAP 60Cx interface setting 

to the appropriate interface format. Refer to 

.

The USB drivers should have been automatically 

installed when you installed the Trip & Waypoint 

Manage software that came with your GPSMAP 

60Cx. When you initially connect the GPSMAP 60Cx 

to a USB port, your computer might prompt you to 

locate the destination of the drivers for the device, the 

default directory is c:\Garmin. You only need to install 

the drivers once. After the drivers are installed, your 

computer always detects your GPSMAP 60Cx when it 

is connected. USB drivers can be updated periodically. 

You can find updates at 

A

PPendIx

 > 

c

onnectIng

 

to

 

A

 c

oMPuter