Ask Proxima M9 Manual De Usuario
28
To replace the lamp
Important!
When replacing the lamp, use the special screwdriver that comes with the replacement
lamp. The projector does not come with a screwdriver.
lamp. The projector does not come with a screwdriver.
1
Turn off the projector and unplug its AC power cord.
2
Wait for about 60 minutes to allow the projector’s current lamp to cool down
completely.
completely.
3
Turn over the projector and place it on top of a desk or on some other stable
surface.
surface.
4
Loosen the lamp cover screw, and then remove the lamp cover.
5
Loosen the three screws indicated by an S mark.
Lamp cover
Lamp cartridge