Arturia MOOG MODULAR 2.6 Manual De Usuario

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL

To add a complex filtering with the fixed filter bank, start by activating the 2 switches
“VCA1” and “VCA2”. This will connect the effect to the two VCA outputs.

Modify the filter frequency bands by turning the gain knobs. This will increase (to the right)
or reduce (to the left) the gain corresponding to these frequencies.

Increase the gain of the chosen frequency

You  can  refine  the  equalization  with  the  bandwidth  knob  corresponding  to  the  frequency
you have chosen. If you turn the knob (underneath the frequency gain setting) to the right,
you  will  reduce  the  bandwidth  around  the  central  frequency  to  make  the  equalization
setting increasingly  precise.  On  the  other  hand,  by  turning it  to  the left,  you  will increase
the bandwidth, making the equalization less precise.

Set the frequency band width

If you have applied several strong equalizations, (with very pronounced band reductions for
example) you run the risk of having a consequential decrease in volume. To regain a
normal volume level, turn the “gain” knob (on the bottom right of the filter bank) towards
the right. Watch out for saturation.

Filter bank output gain

Thanks to MIDI, it is possible to record frequency gain and band width knob movement (with the MIDI sequencer).

This will make the sound “speak” or evolve in a manner that synthesizer filters cannot. Try it for yourself.

5.4.2.2

The “Dual delay”

You can also enrich your sound and give it more stereo space; for this, add stereo delay.