Arboria Longevity Manual De Usuario

C O N N E C T I N G   T H E   M E D A L L I O N S   T O   T H E   H E A D E R S    

We recommend installing the medallion on the header 
prior to final assembly. Needle nose pliers can be help-
ful in holding the 1/2” nail. 

STEP 1 

 1 

C O N N E C T I N G   T H E   B R A C E S   T O   T H E   H E A D E R  

Install all 4 braces on the ends of the headers  
into the pre-drilled holes using 2” screws. 
 
 
Important note: 
Placing screws into  pre-drilled holes ensures proper align-
ment of side panels. 

STEP 2 

 2 

C O N N E C T I N G   T H E   S I D E   P A N E L   T O   T H E   H E A D E R S  

Line up the top of the brace and the top of the side panel. 
Position the side panel against the back of the brace. 
Connect the side panel to the header using the 2” wood 
screws. 
Connect the brace to the side panel using 2 1/2” wood 
screws. 
Repeat on both ends of the header. 
 
Important note: 
When positioning side panel for attachment to header make 
sure the staples in side panel lattice face to the outside of 
arbor. 

STEP 3 

 3 

2 1/2” screws 

2 ” screws