APM PT-3 Manual De Usuario
21
name and closest intersection from a map server and send these
details
details
As
RS failed
for
l be sent to the Control Base
through SMS instead. In that case, you will receive location
details sent from the Control Base directly (backup feature).
details sent from the Control Base directly (backup feature).
n
istory and results over unlimited time.
You can start and end tracking your devices in real-time, following
its route on a map (GPRS connection and network coverage
required).
required).
You can setup and modify device configurations, define Geo-Fence
areas and speed limits. You will also be able to configure sleeping
modes for the GPS engine to reduce power consumption.
modes for the GPS engine to reduce power consumption.
through SMS text message to you.
an option, if the device’s first attempt to dial GP
any reason, the GPS data wil
line Tracking
O
NOTE: To send location requests from authorized
Contact numbers, you will need to enable Caller
ID features on your cell phone.
Contact numbers, you will need to enable Caller
ID features on your cell phone.
¾ By default, the Personal Tracker will send position updates to the
Control Base server over GPRS in 5-Minute intervals.
¾ From the Control Base software, over Internet from the Tracking
Website or GPRS enabled cell phones, you will be able to see latest
position updates and display them on a map. You can view
Tracking h
position updates and display them on a map. You can view
Tracking h
¾ If your service plan allows it, from the Control Base or Websites,
you are also able to setup Tracking schedules for periods up to 45
days, in intervals between 30 seconds and 17 hours.
days, in intervals between 30 seconds and 17 hours.
¾
¾