AMX NXC-M/ME/MPE Manual De Usuario

11) Set Telnet Timeout in seconds

12) Display Telnet Timeout in seconds

13) Make changes permanent by saving to flash

Or <ENTER> to return to previous menu

Security Setup ->

The Main Security Menu shows a list of choices and a prompt. To select one of the listed 

choices, simply enter the number of the choice (1-13) at the prompt and press 

<ENTER>

.

Each option in the Main Security Menu displays a sub-menu specific to that option.

The following sub-section describe using each of the Main Security Menu options.

For a detailed description of each option in the Main Security Menu, refer to  Main Security 

Menu on page 36.

Type 1 and 

<ENTER>

 at the Security Setup prompt (at the bottom of the Main Security Menu) to 

display the Security Options Menu.

The Security Options Menu sets the "global" options for the NetLinx master. It is accessed by the 

Set Security system options of the Main Security Menu. This first thing that will happen is you will 

be asked one of two questions. If NetLinx master security is enabled, you will see the following:

NetLinx Master security is Enabled

Do you want to keep NetLinx Master security enabled? (y or n):

! 

If you answer y for yes, security will remain enabled and you will be taken to the 

Security Options Menu. 

! 

If you answer n for no, all security settings (except FTP security) will be disabled and 

you will be taken back to the Main Security Menu.

If NetLinx master security is not enabled, you will see the following:

NetLinx Master security is Disabled

Do you want to enable security for the NetLinx Master? (y or n): 

! 

If you answer y for yes, security will be enabled and you will be taken to the Security 

Options Menu. 

! 

If you answer n for no, all security settings (except FTP security) will remain disabled 

and you will be taken back to the Main Security Menu.

The Security Options Menu is displayed as follows:

Select to change current security option

 1) Terminal (RS232) Security.................. Enabled

 2) HTTP Security.............................. Enabled

 3) Telnet Security............................ Enabled

 4) Security Configuration Security............ Enabled

Or <ENTER> to return to previous menu    

Security Options ->