Alvarion BREEZENET BU-DS.11 Manual De Usuario

Descargar
Página de 92
The DS.11 Configuration Utility 
 
 
 
3-29 
At the end of the upgrade session, the following window is displayed indicating that 
the operation was successful. 
 
Figure 
 
3-19: Firmware Upgrade Process 
NOTES: 
Do not disconnect any cables or try to stop the process before downloading is completed. 
All configured parameters are saved during the upgrade/download procedure. 
Advanced TFTP Settings 
This section describes how to configure advanced parameters when using the 
firmware upgrade utility. 
 
Figure 
 
3-20: Advanced TFTP Setup 
The Advanced TFTP Setup window enables you to tune the TFTP session 
parameters for a more efficient firmware upgrade, depending on your actual 
deployment.  
♦  Packet timeout: Defines the time (in seconds) it takes for a packet to timeout. 
The range is from 1 to 30 seconds with a default of 3 seconds. 
♦  Packet Retries: Defines the number of times that a packet will be sent after it 
timeouts in a TFTP session. The range is from 1 to 5 retries with a default of 
3 retries.