ALTINEX Scanner MT106-100 Manual De Usuario
MULTI-TASKER
13
24. [G]
This command is used to request group data.
With the command, the user can identify which
input or output of a particular group is on.
With the command, the user can identify which
input or output of a particular group is on.
Command Format: [GkUi]
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
Example:
In unit ID0, if group 1 has DA Cards with
outputs 1 and 2 on, while group 2 has SW
Cards with input 2 on:
outputs 1 and 2 on, while group 2 has SW
Cards with input 2 on:
[G1]: will return feedback as ON12 G1U0.
[G2]: will return feedback as ON2 G2U0.
[G2]: will return feedback as ON2 G2U0.
25. [RD]
This command displays the members in each
group.
group.
Command Format: [RDGkUi]
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
member = C1 - C19 (card 1 to 19)
(1-8 for MT100-101 or 1-4 for MT100-106)
(1-8 for MT100-101 or 1-4 for MT100-106)
Example:
The cards in slots 1, 2 and 19 are part of group
5 in unit 1. Read the member data for group 5
of unit 1, by sending the command [RDG5U1].
The system will return feedback as follows:
5 in unit 1. Read the member data for group 5
of unit 1, by sending the command [RDG5U1].
The system will return feedback as follows:
C1C2C19 G5U1.
7.3 SUMMARY OF COMMANDS
1)
[VER]
Receives software version
2)
[Ci]
Receives status of the card
3)
[CLR]
Resets card to defaults
4)
[ + ]
Increments and Decrements
[ - ]
selected commands
5)
[HPOS]
Set the Horizontal Position
6)
[HPOS]
Adjust/Read Horiz. Position
7)
[VPOS]
Set the Vertical Position
8)
[VPOS]
Adjust/Read Vert. Position
9)
[HSIZE]
Set the Horizontal Size
10) [HSIZE]
Adjust/Read Horizontal Size
11) [VSIZE]
Set the Vertical Size
12) [VSIZE]
Adjust/Read the Vertical Size
13) [QZOOM]
Zoom to a quadrant
14) [QZOOM]
Adjust Zoom by quadrant
15) [BRIG]
Set Brightness level
16) [BRIG]
Adjust/Read Brightness
17) [SHARP]
Set Sharpness level
18) [SHARP]
Adjust/Read Sharpness
19) [OUT]
Select NTSC or PAL format
20) [BAR]
Video or test pattern
21) [HELP]
Display available commands
22) [WR]
Group multiple cards
23) [CLR]
Clear group configurations
24) [G]
Request group data
25) [RD]
Display group members
TROUBLESHOOTING GUIDE
8
We have carefully tested and have found no
problems in the supplied MT106-100; however, we
would like to offer suggestions for the following:
problems in the supplied MT106-100; however, we
would like to offer suggestions for the following:
8.1 LED IS NOT LIT
Cause 1:
Card cage is not plugged in.
Solution:
Plug card cage in. If the LED lights,
the problem is solved. If the LED is
still not ON, see Cause 2.
the problem is solved. If the LED is
still not ON, see Cause 2.
Cause 2:
Card is not plugged in all the way.
Solution:
Push the card in all the way. If the
LED is still not ON, see Cause 3.
LED is still not ON, see Cause 3.