Alesis MULTIMIX USB2.0 Manual De Usuario

 

 

 

The HDPH / CTRL RM knob controls the level of  the signal 

being sent to the CTRL RM OUT and the PHONES output. The 

level of  this signal is represented by the LED meters. The “CTRL 

RM” in the name of  this knob refers to the fact that it controls the 

signal that typically is sent to the control room monitors of  a 

studio, where someone—usually an engineer—is working the 

mixer. However, don’t be intimidated if  you’re using this mixer in 

your bedroom, which probably isn’t equipped with a control room. 

In this scenario, you can use headphones or connect the CTRL 

RM OUT to your speakers. 

 

 

 

This is the level control for the signal returning to the mixer via 

AUX RETURN A. 

 

 

 

If  you are using one of  the MultiMix 8 USB’s internal effects, this 

knob controls the effect level. If  AUX SEND B is connected to an 

external device, this knob controls the level for AUX RETURN B. 

 

 

 

These are the two rows of  yellow, green and red lights you see in 

the master section of  the mixer. The LED meters allow you to 

view the signal level of  the main mix and 2-TRACK IN depending 

on which signal you have routed to the control room mix. 

 

 

 

When this LED is lit up, that means the POWER ON switch on 

the rear of  the mixer has been activated. 

 

 

 

When this one is lit up, that means the PHANTOM ON switch on 

the rear of  the mixer has been activated and is supplying +48V 

phantom power to all XLR mic inputs.