AirLink AWLH5075 Manual De Usuario
20
4.6 WPS (Easy Setup Button)
WPS
is a new and easy way to configure the encryption for your wireless network
clients. In order to use it, you need to have a router that supports this feature, like the
AR675W Airlink101 Wireless N 300 Green Router or AR570W Wireless N 150 Router.
You also need to configure the wireless encryption on the router; you should find the
instructions for configuring it in the router User Manual. If your wireless router does not
support WPS, you will need to set up the wireless security manually and you can skip
this section.
AR675W Airlink101 Wireless N 300 Green Router or AR570W Wireless N 150 Router.
You also need to configure the wireless encryption on the router; you should find the
instructions for configuring it in the router User Manual. If your wireless router does not
support WPS, you will need to set up the wireless security manually and you can skip
this section.
We are using the AWLH5075 Wireless N 150 PCI Adapter and AR675W Airlink101
Wireless N 300 Router to illustrate the following setup instructions.
Step 1
Open the Airlink101 Wireless Monitor. Click the WPS tab.
Choose your configuration method:
- For Pin Input method, write down the Pin Code on a piece of paper then click PIN
button, continue to Step 2a
- For Push Button method, click PBC button, or push the Easy Setup Button (WPS
Button) on the PCI card for 3 seconds. Continue to Step 3a.
Button) on the PCI card for 3 seconds. Continue to Step 3a.
Pin Code