AEG Stroller MBS 6000 Manual De Usuario

4 

If you have already taken the UPS into operation then switch it off as 
the first step. Now disconnect the UPS from the mains by 
disconnecting the mains connector. 

¾  Before you perform the installation described below, make sure 

that none of the cables are live. 

¾  Make sure that the external bypass switch is in its default 

position "NORMAL". 

        zum
USV Ausgang

O

u

tput

O

u

tput

O

u

tput

O

u

tput

    Fuse
250V/10A

    Fuse
250V/10A

    Fuse
250V/10A

    Fuse
250V/10A

Netzeingang

AC Input

to UPS Output

        zum
USV Eingang

to UPS Input

Ausgang

Output

 

 

Rear view of MBS 6000 

 

{

 Connect the input of the external bypass to the mains 

connection cable provided with the UPS and plug the mains 
connector into a suitable shockproof socket. In particular for 
types with high power ratings, make sure that the fuse in your 
sub-distribution system is sufficiently large. 

|

  Two connection cables are supplied with the external bypass. 

Make the following connections: 

Connect "OUTPUT" to the UPS output. 

}

  Connect "INPUT" to the UPS mains input. 

~

  As the last step, connect your loads. To do this, use the load 

connection cables provided with the UPS. 

This completes the installation and cabling of the UPS with the 
external bypass unit. Now start up the UPS system in accordance 
with the operating instructions.