Advantech INTRAC-305 Manual De Usuario
INTRAC-305
OPERATION
© 2011 Advantech Wireless
INTRAC-305 MANUAL - Issue 3.2
Page 15
3
MANUAL/STOW
1
2
3
4
5
6
moves to the New Mode menu (not
available when in remote Control Mode)
Stows or Unstows (toggle) the antenna
depending on its current state
(toggle) selects whether manual control
buttons drive Az/El or Pol axes
latches the currently operated Manual
Drive button until pressed a second time
Manual
Latch
Drive
Stow/
Unstow
Standby
skips to the Home (root) menu
Select
Az&El
or Pol
New
Mode
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
Beac Level
Beac Freq
El Angle
Az Angle
Pol Angle
Local
Current Mode
Home
Path
HOME - NEW MODE - MENU KEY 3
Description
Manual
This menu screen enables the antenna pointing direction to
be changed manually by use of the Manual Control Keys on
the front panel. Menu key 5 enables either azimuth &
elevation or the polarisation motors to be driven.
be changed manually by use of the Manual Control Keys on
the front panel. Menu key 5 enables either azimuth &
elevation or the polarisation motors to be driven.
Azimuth is driven by the left and right manual keys.
Elevation is driven by the upper and lower manual keys.
Polarisation is driven by the left (ccw) and right (cw) manual
keys.
keys.
Menu key 6 latches which ever manual key is pressed and
drives at an increased speed. (useful for large distance
moves) Pressing key 6 again releases the latching effect.
drives at an increased speed. (useful for large distance
moves) Pressing key 6 again releases the latching effect.
Stow
Menu key 4 (alternate functions) causes the antenna to be
driven to the pre-set stow position (via the preliminary stow
position) and, where appropriate, the stow pins to be driven
into locking position.
driven to the pre-set stow position (via the preliminary stow
position) and, where appropriate, the stow pins to be driven
into locking position.
If the antenna is “stowed” key 4 causes the stow pins to be
withdrawn, where appropriate, and the antenna to drive to the
preliminary stow position. (see Stow Setup)
withdrawn, where appropriate, and the antenna to drive to the
preliminary stow position. (see Stow Setup)
Notes
The Drive Fail alarm does not work in Manual (P) mode.
The antenna may be driven through azimuth 0
(North) in
Manual (P) mode (azimuth 180
[South] in Southern
Hemisphere).
Manual (P) mode is local (front panel) control as opposed to
remote manual control which is Manual (A) Mode.
remote manual control which is Manual (A) Mode.