ADIC Time Clock 6-00028-01 Rev A Manual De Usuario
Managing the AMASS File System
3-74
Command Reference
6-00028-01 Rev A
Output Examples
Following is an example of output generated by using no
options:
options:
IDLETIME
The
IDLETIME
parameter—configured during AMASS
installation—defines the length of time in seconds a drive will
remain idle before AMASS will remove tape media from the
drive. This parameter affects all your drives. For configuration
information, refer to “IDLETIME” in Installing AMASS.
remain idle before AMASS will remove tape media from the
drive. This parameter affects all your drives. For configuration
information, refer to “IDLETIME” in Installing AMASS.
NOTE:
Idle eject is not supported for optical drives.
-e secs drivenumber
Dynamically reset the idle eject feature on
a per tape drive basis
a per tape drive basis
-a drivenumber
Activate specified drive
-i drivenumber
Inactivate—AMASS will not use—the
specified tape drive
specified tape drive
jukeboxnumber
(defaults to 1)
Enter the library number where the
specified tape drive is located
specified tape drive is located
Option
Description
# drivestat
DRIVE
JUKE
STATUS
ERRORS
IDLETIME
1
1
A
0
0
2
1
A
0
360
drivestat: 2 drives configured in this system
NOTE: The
IDLETIME
displayed by the
drivestat
output is the
per-drive value, not the global value.