ADIC Time Clock 6-00028-01 Rev A Manual De Usuario
Managing the AMASS File System
6-00028-01 Rev A
Initial Setup Tasks
1-7
5
volformat
NOTE: Not applicable for
CDs.
CDs.
Format the Backup Volume.
If you are using a standalone
drive, you must format the
volume from the sysop
interface. For information on
this interface,
drive, you must format the
volume from the sysop
interface. For information on
this interface,
Interface to
Standalone Drives chapter in
Accessing Storage Devices.
Accessing Storage Devices.
6
Make AMASS aware of all your other media. For
instructions, see
instructions, see
.
7
amassbackup
Perform a full backup (
-f
) with
the verbose (
-v
) option of the
AMASS database
(
(
/usr/filesydb
) and
transaction logs
(
(
/home/filesysdb/journal
).
For instructions, see
8
volstat
Verify the status of the Backup
Volume is INACTIVE in the
AMASS File System Database.
Volume is INACTIVE in the
AMASS File System Database.
An INACTIVE status means
that AMASS cannot read or
write to the volume. This
prevents AMASS from writing
to this volume thus corrupting
the backup data.
that AMASS cannot read or
write to the volume. This
prevents AMASS from writing
to this volume thus corrupting
the backup data.
Before using the
amassrestore
command to restore these files,
change the status of the
Backup Volume to ACTIVE with
the volstat -a command.
change the status of the
Backup Volume to ACTIVE with
the volstat -a command.
Step
Command
Description