ADIC Time Clock 6-00028-01 Rev A Manual De Usuario
Managing the AMASS File System
-16
Troubleshooting Tools
6-00028-01 Rev A
AMASS Does Not Start
AMASS does not start.
To correct, perform the following steps:
Step 1.
Log in as root.
Step 2.
Use the amass_log script to display the system
log messages. For more information on this script,
see
log messages. For more information on this script,
see
Make sure the messages being looked at are for the
current time period. Review prior messages to
determine if any errors indicate the cause of the
problem. For additional information regarding
messages, refer to Errors and Corrective Action.
current time period. Review prior messages to
determine if any errors indicate the cause of the
problem. For additional information regarding
messages, refer to Errors and Corrective Action.
Step 3.
After performing corrective action, start AMASS
using
using
amass_start
. For more information on this
Step 4.
If the problem persists or if the cause can not be
determined through the system log, make sure the
library is properly connected and run the
determined through the system log, make sure the
library is properly connected and run the
install_tests
script. For more information on
this script, see
on page 4-16. Check
the script output for recommended corrective action.
Step 5.
After the corrective action has been performed, start
AMASS using the
AMASS using the
amass_start
script. For more
information on this script, see
Step 6.
If the problem persists, see