AB Soft Litebook Elite 2.02 Manual De Usuario
Learn more at www.litebook.com
3
EASY SET-UP GUIDE:
1)
ATTACH COVER/STAND: (If not attached upon receipt)
• Remove cover/stand from nylon carrying case
• Align base of cover/stand to shaft at base of your Elite. Push ‘gently’ until you hear
a ‘CLICK’. The stand is now attached.
2)
Pull out the cover/stand from the front of the Litebook Elite as shown.
3) BEFORE FIRST USE
: CHARGE BUILT-IN BATTERY:
With Elite in upright usage position, plug the AC adapter into the Litebook and into an
electrical outlet. Allow 4+ hours to fully charge built-in battery the first time. Unit is fully
charged when all 4 Green battery charge indicator LED’s are lit.
4)
Turn on the Litebook Elite by pressing the on/off button. (See Fig. 1 on Pg. 2)
5)
Begin Usage. (See Fig. 3 on Pg. 5)
To learn more
about the Elite
adapter and
international
plug set
see page 8.
NOTE: Plugging the unit in for the first time will automatically program the unit for a 30
minute session, which is suitable for most users and most applications. Should you
wish to change the timer setting, follow the easy steps in #6 on page 4. The timer does
NOT need to be programmed before each use.
minute session, which is suitable for most users and most applications. Should you
wish to change the timer setting, follow the easy steps in #6 on page 4. The timer does
NOT need to be programmed before each use.