AAMP of America PXDP2 Manual De Usuario

2

1.3  Compatibility Notes

This section will inform you of the specific requirements for your factory 

radio to be compatible with the iPod2car Gen2 oEM. these notes will in-

form you of any issues or circumstances that can affect the compatibility 

of our product with your radio, audio system, or accessories. not all Fac-

tory radios are compatible with the iPod2car Gen2 oEM. the iPod2car 

will only work on models equipped with the specifications listed below. 

Please read and understand these notes before proceeding:

Radio Requirements

The operation of the iPod2car Gen2 OEM relies upon the radio’s ability 

to display text, such as song title, playlist, or artist information from the 

iPod. Most MP3 compatible radios are capable of displaying at least one 

line of text information on the faceplate.

Ford

radios must be “can-bus”, satellite ready, or have “MP3” printed on 

the faceplate of the radio. This indicates that the required connection is 

present on the rear of the head unit and that the radio has the necessary 

functionality to operate the iPod2car. 

iPod2car interface

Docking cable

Radio specific harness

1.4  Configuration and Harness Selection

This section will instruct you on how to properly identify and/or confirm the 

proper interface dip-switch configuration and harness selection for your 

vehicles factory radio.  On the following page you will find our Harness and 

Dip-Switch Configuration Chart. This chart will inform you of the proper 

harness and dip-switch configuration for your vehicle.

The iPod2car Gen2 kit that you purchased includes an iPod docking cable 

and the interface. You should have also purchased one of the following 

harnesses;

If you do not have one of these harnesses, your authorized Peripheral® 

dealer will have the harness for you to purchase separately.