Dimplex WFC 3NB Manual De Usuario

Mesh

Filter

Filter
Retaining 

Wires

Air Inlet

Grille

 
WARNING : 

BEFORE UNDERTAKING ANY MAINTENANCE OR 
CLEANING WORK ON THE APPLIANCE, IMMEDIATELY 
DISCONNECT THE ELECTRICITY SUPPLY EITHER BY 
SWITCHING OFF AT THE ADJACENT DOUBLE POLE 
SWITCH OR BY REMOVING THE PLUG FROM THE 
SOCKET. 
 
The outside of the appliance should be wiped over with a soft 
damp cloth and then dried. Do not use detergents or abrasives. 
The filter should be cleaned by gently passing the soft brush 
attachment of a vacuum cleaner over the front grille.

 

 
 

 
THE INTERNAL CLEANING AND MAINTENANCE WORK 
SHOULD ONLY BE UNDERTAKEN BY COMPETENT 
PERSONS WITH EXPERIENCE OF REPAIRING DOMESTIC 
ELECTRICAL APPLIANCES AND IN FULL KNOWLEDGE OF 
THE POSSIBLE HAZARDS INVOLVED. 
 
 
To ensure the appliance operates efficiently, the following 
maintenance should be undertaken periodically. The cover 
should be removed and refitted as detailed under ‘Procedure’. 
 
• 

These should be cleaned by using the soft 

brush attachment of a vacuum cleaner. Care should be 
taken not to damage the blades. 

 

• 

The filter can be removed completely for cleaning, 

but generally provided this is cleaned frequently as 
detailed above, this should not be necessary. Where 
removal of filter is required for cleaning, the filter retaining 
wires can be removed, allowing the mesh and the filter to 
be taken out (see Fig. 5). 

 

• 

With the cover removed, opportunity should be 

taken to remove any accumulations of dust from within the 
unit. 

 

• 

Fan and motor bearings should be given one 

or two (not more) drops of low viscosity oil (e.g. sewing 
machine oil) approximately every 12 months. 

 For electrical products sold within the European Community. 

At the end of the electrical products useful life 
it should not be disposed of with household 
waste. Please recycle where facilities exist. 
Check with your Local Authority or retailer for 
recycling advice in your country.