DKS Enterprises 9310 Manual De Usuario
5.4 Accessories
The following accessory items can be used with the model 9310 slide gate operator.
Contact Sensor
Contact sensors for use as a secondary entrapment protection device.
Miller Edge, Inc. ME120, ME123, MG020, MGR20, MGS20
Miller Edge, Inc. ME120, ME123, MG020, MGR20, MGS20
Photo Cell
Non-contact (photo cells) sensors for use as a secondary entrapment
protection device.
P/N 8080-010 – Infrared thru-beam, 165 foot sensing distance.
P/N 8080-011 – Photo-reflective beam, 30 foot sensing distance.
protection device.
P/N 8080-010 – Infrared thru-beam, 165 foot sensing distance.
P/N 8080-011 – Photo-reflective beam, 30 foot sensing distance.
Loop Detector
Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9405-010 - Single channel detector.
P/N 9406-010 - Two channel detector
P/N 9405-010 - Single channel detector.
P/N 9406-010 - Two channel detector
Loop Wire
18 AWG loop wire with XLPE insulation is ideal for ground loops.
Available in 500 and 1000 foot rolls with red, blue or black insulation.
Available in 500 and 1000 foot rolls with red, blue or black insulation.
Pre-Fab Loops
Prefabricated ground loops. 24-foot circumference with 50-foot lead-in.
Available in yellow, red or blue jackets. Not for use in asphalt roadways.
Available in yellow, red or blue jackets. Not for use in asphalt roadways.
Loop Test Meter
Meg-ohm meter checks the integrity of ground loops.
P/N 9401-045
P/N 9401-045
Control Station
Three button interior and exterior control stations provide manual open-
close-stop gate operation.
P/N 1200-006 – Exterior
P/N 1200-007 – Interior (mounts into single-gang electrical box)
Manual control station provides a single toggle for NORMAL,
MOMENTARY OPEN and HOLD OPEN operation.
P/N 1200-017 – Interior (mounts into single-gang electrical box)
close-stop gate operation.
P/N 1200-006 – Exterior
P/N 1200-007 – Interior (mounts into single-gang electrical box)
Manual control station provides a single toggle for NORMAL,
MOMENTARY OPEN and HOLD OPEN operation.
P/N 1200-017 – Interior (mounts into single-gang electrical box)
Time Clock
7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 – 7-day clock.
P/N 2600-795 – 365-day clock.
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 – 7-day clock.
P/N 2600-795 – 365-day clock.
Surge Devices
High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage.
P/N 1878-010 - Low Voltage.
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage.
P/N 1878-010 - Low Voltage.
Gate Scale
Use to test ft/pounds required to move gate. P/N 2600-225
Speed Bumps
Prefabricated six-foot speed bump reduces traffic speed through gate
system. P/N 1610-150
system. P/N 1610-150
Nickel Chain
Nickel plated chain.
P/N 2600-443 (10 ft. #41)
P/N 2600-444 (10 ft. #40)
P/N 2600-443 (10 ft. #41)
P/N 2600-444 (10 ft. #40)
Stainless Chain
Stainless steel chain.
P/N 2600-475 (20 ft. #41)
P/N 2600-475 (20 ft. #41)
54