Denso BHT-7000 Manual De Usuario

22

(1)

While  holding  down  the    SF    and    1    keys,
press the  PW  key to start System Mode.  The
SYSTEM MENU shown at left will appear.

(2)

Press the  4  key to select the "SET SYSTEM"
on  the  SYSTEM  MENU  and  then  press  the
 ENT  key, and the screen shown at left will
appear.

(To  return  to  the  immediately  preceding
screen  during  this  setting  procedure,  press
the  C  key.)

Power on the BHT-7000 by pressing the  PW  key.

The following message will appear.

In the following cases, the above message will appear.  In such instances, it is
necessary to set the date and time.

•

The BHT-7000 is first powered on from the time of purchase.

• The BHT-7000 is powered on after the memory back up power source is

completely discharged.

  Set the current
  date and time.

   
   00/01/01 00:00

   _ /  /     :

It is recommended that you upload font files beforehand for such cases that you
would mistakenly delete font files or a memory storage error would cause font files
to be erased.

NOTE

     SYSTEM MENU

  

1:EXECUTE PROGRAM

  2:DOWNLOAD
  3:UPLOAD
  4:SET SYSTEM
  5:TEST
  6:VERSION

     SET SYSTEM
  

1:EXECUTE PROGRAM

  2:DISPLAY
  3:DATE/TIME
  4:BARCODE
  5:COMMUNICATION
  6:KEY
  7:RESUME