Deluo TRISTAR25 Manual De Usuario

 

 

 

23

 

 

4.2.1.5 EverMore Binary Input Message 0x8F: Set Operating Mode   
 
Purpose 

 

Sets the navigation update rate and receiver-operating mode. The receiver-operating mode 

can be set to one of the following:   

 

1.  Normal full power mode without 1PPS output synchronized. 

2.  Power saving mode without 1PPS out synchronized. 

3.  Normal full-power mode with 1PPS output synchronized.   

 

With Navigation Update Rate set to n, measurement is taken and navigation solution is 

computed every n seconds. When power saving mode is selected, the RF/GPSBBP On Time 

field is also referenced. 

 
Format  

 

1 

Message ID = 0x8F 

 

Unsigned byte 

 

2 

Receiver Operating Mode 

 

0 ~ 2 

Unsigned byte 

 

3 

Navigation Update Rate   

1 ~ 10 

Unsigned byte 

1 / Hz 

4 

RF/GPSBBP On Time 

 

0 ~ 4 

Unsigned byte 

 

Note: Instead of software control, the 1PPS function can be also enabled through hardware 

control. There are two I/O pins used for 1PPS function.