Delta Tau TURBO CLIPPER DRIVE Manual De Usuario
Turbo Clipper Drive User Manual
Appendix D
87
APPENDIX D: POWER BOARD E-POINT JUMPERS
E1- E2- E3- E4: E-Stop and Reset Control
E-Point
Description
Default
E1
Remove jumper to enable the hard E-Stop function.
Install jumper to disable the hard E-Stop function.
Not
Installed
E2
Remove jumper to enable both hard & soft E-Stop functions.
Install jumper to disable both hard & soft E-Stop functions.
Not
Installed
E3
Remove jumper to enable the soft E-Stop function.
Install jumper to disable the soft E-Stop function (Soft E-Stop
bit has to be set, and saved to 1).
bit has to be set, and saved to 1).
Not
Installed
E4
Remove jumper to use normally-open Reset switch between
pin 1 and 2 of J13.
pin 1 and 2 of J13.
Install jumper to use normally-closed Reset switch between pin
1 and 2 of J13.
1 and 2 of J13.
Not
Installed