Delta Electronics DELTA DUP-B Manual De Usuario
Chapter 3 Creating and Editing Screens
Fig, 3-10-11 On Line / Off Line Simulation Screen
3.10.8
Off Line Simulation
To test the editing screen, the read/write addresses and the macro command to see if they
are correct, the user can run an off-line simulation. To enable the off line simulation, select
are correct, the user can run an off-line simulation. To enable the off line simulation, select
Tools > Off Line Simulation or click
icon directly or press Ctrl + F5 (Fig. 3-10-11).
3.10.9 Upgrade
Firmware
This option is for upgrading HMI firmware or adding function for HMI. Keeping HMI firmware
version to be the most updated version can optimize HMI operation. Ensure that the software
version of ScrEdit matches the firmware version. The user can get the firmware information
by clicking Tools > Get Firmware Information (Fig. 3-10-12). Regarding the software version
of ScrEdit, the user can find it by clicking Help > Help (Fig. 3-10-13). For the screen of
upgrading the firmware please refer to Fig. 3-10-14.
version to be the most updated version can optimize HMI operation. Ensure that the software
version of ScrEdit matches the firmware version. The user can get the firmware information
by clicking Tools > Get Firmware Information (Fig. 3-10-12). Regarding the software version
of ScrEdit, the user can find it by clicking Help > Help (Fig. 3-10-13). For the screen of
upgrading the firmware please refer to Fig. 3-10-14.
Revision May, 2010
3-223