Dazzle Multimedia Universal 8 in 1 Reader/Writer None Manual De Usuario

Inserting a CompactFlash Card

Before you inser t a CompactFlash Card, be sure to place the Universal Reader/Writer in 
it’s base with the Dazzle logo on the right-hand side. To inser t a CompactFlash Card, follow 
these steps:

1. Position the CompactFlash card in the direction shown in the illustration below.

2. Insert the card in the right media slot with the connectors facing inward. 

Make sure you position the card properly. All CompactFlash card manufacturers adhere 

to a specification that requires a positive keying of the card.

Caution: Be careful not to inser t the CompactFlash card in the wrong direction. 

Make sure the connectors are facing inward and the card is not inser ted upside down. 
If it is forced in, the reader/writer or CompactFlash card may be damaged or data on 
the card may be lost or corrupted. 

3. Gently push the card in all the way until it locks in place.

The card slides in on the molded rails and you should feel a slight amount of 

resistance as the connectors make contact.

Important: If excessive force is required or the card just doesn’t seem to fit, do not 

force the card in the reader. Contact the Dazzle Technical Resource Center for 
assistance. 

Insert the CompactFlash

 

Card with connectors

facing in