DCS TV Converter Box 954 Manual De Usuario
dCS 954 User Manual
Manual for Standard Software Version 1.5x
dCS Ltd
June 2000
Manual part no: DOC136954 iss 2B1
Page 14
file 135954ma2b1.pdf available from website
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
Mute
Menu Set
The
Mute
button is dual function – on its own (
blue
type on the front panel), it
mutes and unmutes the analogue outputs when the unit is locked to a source.
With the other menu buttons (
With the other menu buttons (
white
type on the front panel) it is the menu
Set
button.
The analogue outputs are automatically muted at power up and remain so until
lock is achieved, as indicated by the LED above the
lock is achieved, as indicated by the LED above the
Mute
switch. If
“A-Cut”
,
page 22, is turned on, the unit will mute automatically if the source data is
identified as non-audio.
identified as non-audio.
For Menu operation as the
Set
button, see
“The Software – the Menu”
on
Phase
Menu Down
The
Phase
button is triple function – on its own (
blue
type on the front panel), it
reverses the phase of the analogue outputs. If the “
Panel
set to
Volume,
it functions as the Volume down button. With the other menu
buttons (
white
type on the front panel) it is the menu
Down
button.
The left hand LED above the
Phase
button lights if
CH1(L)
outputs are inverted,
the right hand LED lights if
CH2(R)
outputs are inverted. Pressing the
Phase
button toggles both channels between absolute and inverted phase. Holding the
button down causes the unit to cycle through the following sequence:
button down causes the unit to cycle through the following sequence:
LEDs
Ch1 (L) phase
Ch2 (R) phase
on
off
inverted
absolute
off
on
absolute
inverted
off
off
absolute
absolute
on
on
inverted
inverted
Table 1 – Phase LEDs and Channel Phasing
Release the button when the required setting appears.
For Menu operation as the
Down
button, see
“The Software – the Menu”
on
De-Emphasis
Menu Up
The
De-Emphasis
button is also triple function – on its own (
blue
type on the
front panel), it sets the De-Emphasis characteristic. If the “
Panel
” option, page
27, is set to
Volume,
it functions as the Volume up button. With the other menu
buttons (
white
type on the front panel) it is the menu
Up
button.
De-Emphasis is available for 32, 44.1 and 48kHz sample rates only.
Pressing the button repeatedly causes the single digit
Pressing the button repeatedly causes the single digit
Mode
display to the
right of the button to cycle through the following options: