DataVideo RMC-90 Manual De Usuario
11
Connect to SE-800
Remote RS-232
interface
Pin 2: RX, Pin 3: TX
Pin 5: Ground
Others: Not connected
Remote RS-232
interface
Pin 2: RX, Pin 3: TX
Pin 5: Ground
Others: Not connected
DC 14.4 --- 15V input
from SE-800 Power
adaptor
Pin 1: Ground
Pin 4: VCC
DC 12V 0.5A output
to connect to external
12V DC powered
peripherals
to connect to external
12V DC powered
peripherals
DC 14.4 --- 15V output to
SE-800 Power input
Pin 1: Ground
Pin 4: VCC
SE-800 Power input
Pin 1: Ground
Pin 4: VCC
Connect to Datavideo TLM-404
4x4 TFT LCD or connecting an
certain adaptor cable to control
the Tally interface of video input
source devices, such as Came
4x4 TFT LCD or connecting an
certain adaptor cable to control
the Tally interface of video input
source devices, such as Came
The D-Sub 15-pin connector works
by closing contacts between a
ground pin and the corresponding
LED pin as following pin out table.
*.
by closing contacts between a
ground pin and the corresponding
LED pin as following pin out table.
*.
Do not give power to the pins.
Video
Channel
RED LED
(On Air - Live)
GREEN
LED
(OffLine - Safe)
AMBER LED
(Next - Cued)
A
Pin 1
Pin 2
Pin 3
B
Pin 6
Pin 7
Pin 8
C
Pin 11
Pin 12
Pin 13
D
Pin 5
Pin 10
Pin 15