BMW 2011 X3 xDrive35i Manual De Propietario
1.
Insert the screwdriver from the tool kit, with
the flat side facing outward, past the removal
hook and onto the clip, arrow 1.
the flat side facing outward, past the removal
hook and onto the clip, arrow 1.
2.
Turn the screwdriver by 90°, arrow 2.
3.
Press the removal hook upward, arrow, and
remove the front fog lamp from the front us‐
ing the hook.
remove the front fog lamp from the front us‐
ing the hook.
4.
Detach the connector.
5.
Turn the bulb bracket and remove it.
6.
Remove the bulb and replace it.
7.
Proceed in reverse order to insert the front
fog lamp. Note the guide rails in doing so.
fog lamp. Note the guide rails in doing so.
Turn signal
The turn signals are located next to each low
beam in the engine compartment.
21-watt bulb, PY 21W
beam in the engine compartment.
21-watt bulb, PY 21W
1.
.
2.
Unscrew the cap counterclockwise and re‐
move it carefully.
The bulb is attached to the cap.
move it carefully.
The bulb is attached to the cap.
3.
Turn the bulb clockwise to remove it.
4.
Insert the new bulb and attach the cover in
the reverse order.
the reverse order.
Lateral turn signals
Follow the general instructions on lamps and
bulbs, refer to page
bulbs, refer to page
.
These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.
Please contact your service center in the event
of a malfunction.
Seite 224
224
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
Replacing components